MONNIT WIRELESS VOLTAGE DETECTION - 200 VDC - COMMERCIAL AA BATTERY POWERED
C$ 209.30
Part#
MNS2-9-W2-VD-200
Region | Frequency
Canada - 900 MHz
Product Variations
Add to Cart Successfully! CHECK OUT to view cart, manage quantity and pay.
Related Products
Description
The Monnit Voltage Detector – 200 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 200 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as “Voltage Detected” or “No Voltage”.
The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 – 3.6 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage.
Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.
Features
- Interfaces with other devices or power lines up to 200 volts DC.
- Max sensor input voltage up to 200 volts DC.
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
In the Box
- Wireless Sensor
- Mounting Hardware
- 2 x AA Batteries
ting potential property damage that results from flooding or leaks. Place this sensor anywhere flooding or faulty plumbing could cause a problem. This sensor can also be used to detect a lack of water, allowing you to know when a container is nearing empty.
Features
- Senses immediate presence of water.
- Can also sense non-presence of water.
- Use for detection of any non-cumbustible liquid.
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
In the Box
- Wireless Sensor
- Mounting Hardware
- 2 x AA Batteries
Voltage Detection Sensor Specifications |
|
| Maximum Rated Input Voltage | 50.0 Volts |
| Voltage Detection Threshold | Present above ~.47 Volt, Absent below ~.47 Volt |
| Trigger | Transmits data upon state change |
| Open Circuit Reading | Voltage Absent |
| Lead Wire Length | 2 Wires, 1 ft. ( 12 in.), Red (+), Black (-), 18 AWG (Custom lengths available upon request) |
| Weight | 4.0 oz. |
AA Specifications |
|
| Battery Type | 2 Replaceable AA 1.5 V Batteries |
| Dimension | 4.375 in x 2.470 in x 1.12 in |
| Sensing Element | 2.0 – 3.6 V (2 x AA 1.5V Batteries or Optional Power Supply) |
| Device Range | 250 – 300 ft. non-line-of-sight device range* |
| Battery Life | At 1 hour heartbeat setting, included AA batteries will typically last 3-4 Years. ** |
| Max Operating Temperature Using AA Alkaline | -18°C to 55°C (0°F to 130°F) |
| Max Operating Temperature Using AA Lithium | -40°C to 60°C (-40°F to 140°F) |
| Optimal Battery Operating Temperature | +10°C to +50°C (+50°F to +122°F) |
| Enclosure Material | ABS |
900 MHz Specifications |
|
| Operating Frequency | 900 MHz Operating Frequency |
| Certifications | Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-RFSC1) Complies with Industry Canada standards. (IC: 9794A-RFSC1) |
Suggested Application Uses for This Sensor
- Appliance monitoring
- Sprinkler system monitoring
- HVAC system monitoring
- Line power monitoring
- Power coupling monitoring
- Power supply monitoring
- Sump pump monitoring
